Відео

do you have to remove your center console to get everything out?

I'm gonna repair my tie rod boots this week! mines are torn! and all the flooding here in Florida! the boots are soaked! when I put grease in the boots to I fully fill them up? Thanks!

I just tried this and the starter didn’t have enough to break the bolt🫤what should I try next?

The music was an unnecessary annoyance, other than that, helpful. Cheers.

Thanks for the great, straightforward video! It was a huge help in my DIY battery pack refurb.

Nice video Mr : Where or how did you get a front lower aluminum control

I gotta say I'm a minute in but they have fastener removers just for those! Lol old thread but yeah

I have a hybrid/ EV repair shop. I don’t do anymore hybrid battery pack rebuild on 2nd and 3rd generation prius and all others that uses the NIMH batteries and here is why. In 2004 all those NiMH batteries would be extremely old way past their expected life of 8-10 years. Trying to rebuild one of these aging NiMH battery pack means there is a likelihood it will go bad again within 6 months or less and it would be considered lucky if they even last a year. What I do is just do a new aftermarket swap. Maybe not as good as OEM but at least they are new and have a usefull life than all the aging module circulating around. Another option is upgrading to lithium ion taken from newer generation hybrid. I usually use ones from Hyundai Sonata which fit well with existing prius NiMH box. The modules are a little taller so I had to do some slight hardware modifications. Also an upgrade in the software to accommodate the different charging characteristics of lithium ion.

Do you know if this is the same process for a Gen2 Prius?

Have to love a nice IS300. Hope all is well 💪🏾

hi, thank you so much for sharing the information!! im going to purchase 2 sets for both of my lexus. may i ask..is No.1 for between 1st/2nd gear and No.2 for 2nd/3rd and so on?? the difference between 14mm vs 18mm is how fast it shifts in to next gear or how hard it grabs the next gear? or simply like how much house power ceiling it would handle? thanks again!!!

Video is wrong, should not set the engine at TDC to replace the timing belt

This guy is the goat. Now I know where to start with my IS300

The rotations DO NOT work! I bought OEM outer tie rods and the number of turns is different than the old one (original)

What else has to be done to the transmission for it to hold boost other than what’s in this video

Hey man hope you’re all good, I used to watch and learn a lot from your videos. About to finally take on a turbo build myself and I’ve referred back to a couple of your videos recently.

This is the dumbest thing I've ever seen. Will it shift hard? Yes absolutely because accumulators are designed to soften shifts HOWEVER making your transmission slam gear will do absolutely NOTHING to make it "hold more power". Will it chirp the tires? Maybe if that's what you want but be ready for clunky down shifting and a generally uncomfortable transmission for daily use. Also, making your transmission slam gears will do more to hurt internal parts than help them "hold more power". Also on a side note, pulling the transmission is 1000% unnecessary. All you did was pull the VB and shim the accumulators. WTF would you add several more hrs to a relatively easy 1.5hr maybe 2hr job? I suppose all of this was because I have a customer asking me to do this and somehow guarantee any of his bullshit. 24yrs building transmissions btw

How long did she survive for?

Legend

to save funds and resources we used Toyota supra rotors

Anything on the ABS bracket?

Hello, i got a quick question. Do I need to do an oil change when i replace my vvt solenoid? I never thought I had to until when I got the new solenoid and in the box it said I should do an oil change every time i replace something of VVT Thank you

The fucking music dude 💀

can u safely do the bump start method for crank bolt with an auto transmission?

Thank you 4 this

Cool... i bought a stock 2002 SportCross with 78k miles. I'm looking to put some coilovers and wheels on it. I'm not doing much since its a daily driver

The Blue car needs a 1UZ.

nice work !

Thanks to Evel Knievel for attempting this feat first, it couldn't have been possible if someone like him who thought of it first. As over time jumping is flying as it's been perfected using the rear brake to bring the front end down so theres more control these days, I commend Travis Pastrana for perfecting this jump as it should be performed with full control an landing

Next guy working on the transmission, "how the heck all those coins get in there?"

'Promo SM' 🌷

This is a great tutorial now. How do I get my girlfriend to love me?

Thanks bro I’m replacing my break pads & rotor on my Ls430 next week you definitely made it seem so easy 👌🏁

Glad to see you back at it. Blue car needs 1uz-fe because, V8 noises .

Hey man! Any chance you have an email or something where I could pick your brain a bit regarding your AR5 setup? Have had one in my jzx for a few year and have had nothing but issues. Wondering if you have a moment at some point to answer a few questions regarding how you did it so I can finally get things sorted out.

Post how you did your manual conversion

Just spotted a 300 Sportcross 05’ black/black with 59.000 miles. In the UK so RHD. How much would it cost in the US (assuming LHD - pristine condition) - paying circa 7000$.

About time congrats! Welcome to the black turbo wagon family 😎

What’s the geometry of your Enkei? like diameter, width and offset. I kinda want a set my self but not sure they can clear the upper A arm of the front suspension

One of these cars needs a 1UZ

Love this! More videos please

LS swap the wagon don't think twice

I was shocked to see this upload but Im glad you're back

Love the black wagon 🔥🔥

I definitely find myself wishing I went IS300 sometime but it’s good to see you back!

Great video, If I was in AZ still I would love the blue shell, I have a 1uz ar5 almost ready to find a new home.

It's been a while!!!! Nice, can't wait to see new turbo car. I like your vibe. You give off "been working hard, but it's worth it". 😆

Good to see another video!

My first car, bought second hand in 1980, (1976 model), living in Canada. Fondly remembered. Already needed paint job and minor rust repair. Different era. Thanks for the look.